How to Make a Copper Pyramid: the Calculator

Making a copper pyramid is less difficult than it looks. What matters most is the proportion. Choose the shape below and enter the length of the base. The calculator gives you the height, the length of each edge, all the angles and how much tube you need.

Measurements are center lines: measured to the middle of the tube or timber. For wood a few inches thick, the outside height comes out slightly larger.

Which measurement is which

Drawing of a pyramid showing the base, the height, the slant height of a face, the edge and the slope

The base is the length of one side of the square at the bottom. The height is measured straight up, from the middle of the base to the top. The slope is the angle at which a face rises: 51.8 degrees for the Cheops pyramid, 76 degrees for the Russian pyramid. The edge is the slanted line from a corner to the top. That is the length you cut, and it is always longer than the height.

What you need

  • Solid copper rod or copper tube. For a small pyramid, a diameter of 6 or 8 mm (about 1/4 or 5/16 inch) works well. The difference between rod and tube is explained under copper. For a large pyramid, 1/2 or 5/8 inch tube is lighter and just as sturdy.
  • A tube cutter or a fine hacksaw, and a file to smooth the ends.
  • Connectors for the corners and the top. You can also bend the tube, or flatten the ends and fasten them.
  • A tape measure and a protractor to check the angles.

How to make it

  1. Choose the shape and the base in the calculator.
  2. Cut four pieces for the base and four pieces for the edges at the lengths the calculator gives.
  3. Make the square of the base first and check that both diagonals are the same length. Then it is truly square.
  4. Set the four edges on the corners and bring them together at the top.
  5. Measure the height. If it matches the calculator, the proportion is right too.

A wooden pyramid

Which wood to choose and how long it lasts, you can read in pyramid materials. With wood, two more angles come in. The edges have to meet neatly at the top, and for that you bevel the top of each edge. The calculator gives the angle between two faces and the bevel angle, measured from vertical. On a Russian pyramid the angle between two faces is just over 93 degrees, and you bevel each side at just over 43 degrees.

Prefer a ready-made pyramid? At Meditech Europe you'll find the copper Cheops pyramid and the copper Russian pyramid. Living in the US? We ship there on request, just send us a message.

Frequently asked questions

How do I calculate the height of a pyramid?

The height is half the base times the tangent of the slope. For a Cheops pyramid that comes to about 0.64 times the base, for a Russian pyramid twice the base.

How long should the edges be?

The length of an edge is the square root of the height squared plus half the diagonal of the base squared. For a 10-inch base in the Cheops shape, that is about 9.5 inches. The calculator does it for you.

Which copper tube should I use?

For a pyramid up to about 12 inches, a diameter of 1/4 to 5/16 inch looks right. For larger pyramids, choose thicker tube so it stands firmly.

Last updated: November 2026

Marijn Makkes van der Deijl

Written by Marijn Makkes van der Deijl, who has been working with copper and pyramids since 2019.